Starcraft Vinyl - Printable HTV Vinyl- InkJet

Regular price $1.99

Starcraft Printable Vinyl allows you to print and transfer you image from your inkjet printer.  Needs to be applied to garments/materials with a tight weave, especially sweatshirts.  

Sheets Measure: 8.5"x11"

**READ APPLICATION DIRECTIONS

Application Instructions Light Material: (Iron can be used but not recommended)

StarCraft Transfers for Light Materials 8.5" x 11" Sheets make it easy to create your own printed image for application to light colored materials ranging from white to about lighter pastel colors. The unique polymer StarCraft uses actually transfers the inkjet printed image to the garment. A heat press is highly recommended for applying this product due to temperature and pressure requirements. When applying to colored garments you may see the polymer where no ink is printed around the image--this will fade and soften after the garment is washed once or twice.

Care Instructions

  • To wash, turn garment inside out, wash in cold water. Do not bleach. Tumble dry low heat (hang dry recommended).
  • If ironing, do NOT iron directly on the applied image.

Printing / Application Instructions:

  1. Mirror image before printing.
  2. Trim away excess material using scissors or a die-cutting machine.
  3. Apply the printed image side down
  4. Press for 30 seconds at 375 F with heavy pressure. (Temperature and pressure are very important.)
  5. Peel the backing from the image while hot.

Application Instructions Dark Material: (Iron can be used but not recommended)

Our inkjet printable transfers for Dark Materials make it easy to create your own printed image for application to colored garments ranging from darker pastels to black.    A heat press is recommended for applying this product because of the temperature and pressure requirements.  Peel from the backing paper or use heat transfer mask before pressing.

StarCraft Transfers for Dark Materials are easy to identify by the red logo printed on the back of each sheet as well as the red instructions.

VIDEO: https://www.youtube.com/embed/8GP-EEjKXXM

  1. Print right-facing (don't mirror) on the opaque material side of paper.
  2. Trim away excess material using scissors or a die-cutting machine.
  3. Remove image from release liner (the backing).  For many images, it is best to use heat transfer mask to remove the image and press as the material is somewhat delicate.
  4. Apply the transfer with the printed image side up.
  5. Press for 30 seconds at 350 F with medium pressure. Temperature and pressure are very important.
  6. Peel the backing from image after completely cooled.

Washing and Care Instructions:

  1. Turn garment inside out.
  2. Wash in cold water using mild detergent.  Do NOT bleach
  3. Dry on low heat but hang dry is recommended.
  4. When Ironing DO NOT iron directly on the transfer, it will melt.

Customer Reviews

No reviews yet Write a review

Customer Reviews

No reviews yet Write a review